SW110V12A | AC/DC system in wall cabinet with batteries included  

industry

  • Polyester wall cabinet with a glass door and dimensions of 190mm(H) x 500mm(W) x 320mm(D)
  • Input: 100Vac to 264Vac / 50Hz / CFP > 0.99
  • Output: 110Vdc (AE1500-120 Rectifier Module) in parallel with 9 blocks (connected in series) of 7Ah/10h VRLA acid battery
  • Other options:
    • Output: 48Vdc (AE1500-48 Rectifier Module) in parallel with 4 blocks (connected in series) of 28Ah/10h VRLA acid battery
    • Output: 24Vdc (AE1500-24 Rectifier Module) in parallel with 2 blocks (connected in series) of 50Ah/10h VRLA acid battery
  • Variation of Output voltage depending on the cabinet’s interior temperature, controlled by the C22-URR unit
  • Battery current limiting controlled by I22-URR unit
  • Manual battery capacity test (unit C22-URR)
  • Stainless steel support and liquid retention basin
  • Input, Output and Battery Protection Circuit Breakers
  • Tele-signaling (PLC) by potentially potential-free contacts of General Fault / Mains Fault / Battery Fault / Low DC Voltage
  • Digital or analog voltmeters and ammeters for measuring output voltage, rectifier current, charging and discharging current of batteries
  • 2 Year Warranty
  • EU Declaration of Conformity

SD3000MW | Wall DC/DC converter system for one output voltage

  • Wall cabinet with a glass door and a second door to access the rear part of the Converters, clamping terminals and other system components
  • Input Voltage: 250Vdc/125Vdc/110Vdc/48Vdc
  • Output Voltage at 24Vdc/125A (3x SD type CC/CC converters)
  • Other possible output voltage 48Vdc/66A
  • Flexible modular configuration (N+1)
  • Hot Plugging Switching Rectifier (SD)
  • General input protection circuit breaker and input and output protection circuit breakers for each DC/DC converter
  • Two Outputs available and protected by Circuit Breaker (other options available)
  • Tele-signaling unit (CLP) with potential-free contacts
  • Digital voltmeter and ammeter for measuring output voltage and current
  • Warranty of 2 to 5 Years
  • EU Declaration of Conformity

SD6000MW – Wall DC/DC converter system for one output voltage

  • Wall cabinet with a glass door and a second door to access the rear part of the Converters, clamping terminals and other system components
  • Input Voltage: 250Vdc/125Vdc/110Vdc/48Vdc
  • Output Voltage at 48Vdc/125A (6x SD type converters)
  • Other possible output voltage 24Vdc/250A
  • Flexible modular configuration (N+1)
  • Hot Plugging Switching Rectifier (SD)
  • General input protection circuit breaker and individual protection circuit breakers for each DC/DC converter
  • Two Outputs available and protected by Circuit Breaker (other options available)
  • Tele-signaling unit (CLP) with potential-free contacts
  • Digital voltmeter and ammeter for measuring output voltage and current
  • Warranty of 2 to 5 Years
  • EU Declaration of Conformity

2xAS24V6K3SD+BAT – Dual Simplified DC Power System plus Battery in the same cabinet

  • Input: 400Vac / 50Hz / CFP > 0.99
  • 6kVa Isolation Transformer
  • Output at 24Vdc / 200A (2xFR4K24V100A) 110Vdc/48Vdc optional
  • Flexible modular configuration (N+1)
  • Hot Plugging Switching Rectifier (FR)
  • Diode reduction system (optional)
  • Hot plugging ground fault detection unit (DPT)
  • Independent 110Vdc Maximum Voltage Sensor (SMT)
  • Tele-signaling unit (CLP) with potential-free contacts
  • Digital or analog voltmeters and ammeters for measuring battery voltage/current and output voltage/current
  • VRLA type batteries with capacity up to 800Ah, (24V) fixed in 2 shelves with liquid drainage to the retention basin (other solutions available)
  • Output voltage variation according to the temperature
  • Manual Battery Capacity Testing
  • Flexibility with various types of batteries
  • Warranty of 2 to 5 Years
  • EU Declaration of Conformity

AS110V6K3SD + BAT | Simplified System with two DC output voltage

  • Input: 400Vac / 50Hz / CFP > 0.99
  • 6kVa Isolation Transformer
  • Output 110Vcc / 40A (3xAE1500)
  • Output 48Vcc / 66A (3xSD1000H)
  • Flexible modular configuration (N+1)
  • Hot Plugging Switching Rectifier (FR)
  • Hot plugging DC/DC (SD) converter
  • Diode reduction system (optional)
  • Hot plugging ground fault detection unit (DPT)
  • Independent 110Vdc Maximum Voltage Sensor (SMT)
  • Tele-signaling unit (CLP) with potential-free contacts
  • Digital or analog voltmeters and ammeters for measuring battery voltage/current, and output voltage/current of the two output
  • 9 VRLA battery packs with capacity up to 200Ah, fixed in 3 shelves with liquid drain to retention basin (other solutions available)
  • Output voltage variation according to the temperature
  • Manual Battery Capacity Testing
  • Flexibility with various types of batteries
  • Warranty of 2 to 5 Years
  • EU Declaration of Conformity

AS110V12K3SD + BAT | Simplified System with two DC output voltage

  • Input: 400Vac / 50Hz / CFP > 0.99
  • 12kVa Isolation Transformer (Optional)
  • Output 110Vcc / 80A (6xAE1500)
  • Output 48Vcc / 66A (3xSD1000H)
  • Flexible modular configuration (N+1)
  • Hot Plugging Switching Rectifier (FR)
  • Hot plugging DC/DC (SD) converter
  • Diode reduction system (optional)
  • Hot plugging ground fault detection unit (DPT)
  • Independent 110Vdc Maximum Voltage Sensor (SMT)
  • Tele-signaling unit (CLP) with potential-free contacts
  • Digital or analog voltmeters and ammeters for measuring battery voltage/current, and output voltage/current of the two output
  • 9 VRLA battery packs with capacity up to 200Ah, fixed in 3 shelves with liquid drain to retention basin (other solutions available)
  • Output voltage variation according to the temperature
  • Manual Battery Capacity Testing
  • Flexibility with various types of batteries
  • Warranty of 2 to 5 Years
  • EU Declaration of Conformity